Starting And Stopping - McCulloch M46-110 CLASSIC Operator's Manual

Starting and stopping

Before starting
WARNING! Please read the operator's
!
manual carefully and make sure you
understand the instructions before using
the machine.
Wear personal protective equipment. See
instructions under the "Personal
protective equipment" heading.
• Keep people and animals well away from the working
area.
• Perform daily maintenance. See instructions in the
section "Maintenance".
• Ensure the ignition lead sits correctly on the spark
plug.
Starting
All models have manual choke (primer diaphragm).
If the lawn mower is being started for the first time press
on the fuel pump five times. After that you should press on
the fuel pump three times when starting a cold engine.
• The engine brake handle must be held against the
handlebar when the engine is started.
• Position yourself behind the machine.
• Grip the starter handle, slowly pull out the cord with
your right hand until you feel some resistance (the
starter pawls grip). Pull with force to start the engine.
Never twist the starter cord around your hand.
70 – English
OPERATING
Drive
(M46-125R Classic+, M46-110R Classic, M51-140WR
Classic+, M51-150WR Classic, M51-150R Classic,
M53-150WR Classic)
• Push the propulsion bar in towards the handle in order
to start the drive.
• Before pulling the machine towards you, disengage
the drive and push the machine forward approx. 10
cm.
Stopping
• Stop the engine by releasing the engine brake handle.
• The drive is also disengaged when you release the
brake handle.
• By releasing the brake lever a bit only the drive will be
disengaged.