Settings - McCulloch ROB R600 Operator's Manual

3.15.2.3 Alarm
This function means that an alarm sounds if the PIN
code is not entered within 10 seconds after the STOP
button has been pressed or the robotic lawnmower has
been lifted up for any reason. A ticking noise indicates
that the PIN code must be entered to prevent triggering
the alarm. The alarm can be turned off at any time by
entering the correct PIN code.
3.15.3 New loop signal
The loop signal is randomly selected to create a unique
link between the robotic lawnmower and the charging
station. In rare cases, there may be a need to generate
a new signal, for instance if two adjacent installations
have a very similar signal.
1. Place the robotic lawnmower in the charging station.
New loop signal in the menu.
2. Select
OK and await confirmation that the loop signal
3. Press
has been generated. This normally takes about 10
seconds.

3.16 Settings

SETTINGS
ECO mode
Time & Date
Language
Country
Remote start (R600 only)
Calibrate guide (R600 only)
Reset user settings
About
3.16.1 ECO mode
This function automatically turns off the loop signal in
the boundary loop, the guide wires and the charging
station when the robotic lawnmower is not mowing, i.e.
when the lawnmower is charging or is not allowed to
mow due to timer settings.
ECO mode is suitable to use where there is other
The
wireless equipment not compatible with the robotic
lawnmower e.g.certain hearing loops or garage doors.
ECO mode is activated, the indicator lamp in the
When
charging station flashes green.
the robotic lawnmower can only be started in the
charging station and not out in the working area.
ECO mode , it is very important to always press the
In
STOP button before removing the robotic lawnmower
from the charging station. It is otherwise not possible to
start the robotic lawnmower. If the lawnmower has been
removed by mistake without first pressing the STOP
button, the lawnmower must be placed back in the
charging station and the STOP button pressed. Only
26 - Installation
ECO mode means that
then can the robotic lawnmower be started inside the
working area.
RUN ECO mode and press OK to activate ECO
Select
mode .
Note: Always press the STOP button before removing
the robotic lawnmower from the charging station. In
ECO mode the robotic lawnmower otherwise will not be
started inside the working area.
3.16.2 Time & Date
This function allows you to set current time and required
time format in the robotic lawnmower.
Time & Date Set time
Set date
Time format
Date format
• Set time: Enter the correct time and press OK to
exit.
• Set date: Enter correct date and press OK to exit.
Time format: Place the cursor at the required time
•
OK to exit.
format: 12h 24h. Press
Date format: Place the cursor at the required date
•
format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year)
OK .
Exit by pressing
3.16.3 Language
Set language with this function.
To select language: Place the cursor at the required
OK .
language and press
3.16.4 Country
With this function you can select in what country the
robotic lawnmower will work.
Place the cursor at the required country and press
3.16.5 Remote start, ROB R600
One important function with the guide wire is the
capacity to steer the robotic lawnmower to remote
garden areas when required. This function is very useful
in gardens where, for instance, the front and back are
joined by a narrow passage where the charging station
cannot be installed.
OK .
358 - 002 -