Network Status Indicator (Ns); Configuration Tools - Worcester Greenstar 36LXi User Instructions

LEMCOM EtherNet/IP™ - User manual

4.3 Network Status indicator (NS)

Red LED Green LED
OFF OFF
OFF Flashing
OFF ON
Flashing OFF
ON OFF
Flashing Flashing

CONFIGURATION TOOLS

LEMCOM modules can easily be configured, updated, controlled and diagnosed remotely using one
of the following tools:
Universal PC software dedicated to
configuration, update, control and
diagnostic of all LEMCOM vacuum
pumps of the factory.
Compatible with all LEMCOM protocols.
LEMCOM MANAGER & WEB SERVER
Please refer to the specific user manuals LEMCOM-Manager-xx-x-1155UM0069 and
LEMCOM-Web-Server-xx-x-1155UM0070 for detailed information on the PC software
usage and the embedded web server.
CAUTION
These configuration tools must not be used during production as unexpected
hazardous motion of machinery may occur.
COVAL - LMEIP-UK-D-1155UM0067
Meaning
Not powered, no IP address: the device is powered off, or is powered on but with
no IP address (master) / local bus address (secondary) configured
No connections
Master module: an IP address is configured, but no CIP connections are established
Connected
Master module: an IP address is configured, at least one CIP connection (any
transport class) is established.
Secondary module: a local bus address is configured and the connection with the
master module is established.
Connection timeout
Master module: an IP address is configured, and an Exclusive Owner connection for
which this device is the target has timed out.
Secondary module: a local bus address is configured, and the connection with the
master module has timed out.
Duplicate IP address: an IP address or local bus address conflict has been
detected (not implemented yet).
Self-Test: Start-up phase in progress.
Table 5 - Network Status indicator meanings
Configuration tools
Embedded web server that allows
configuration, update, control and
diagnostic of one given LEMCOM
island.
No software installation required.
14/42