LEMCOM EtherNet/IP™ - User manual
NETWORK CONFIGURATION
Either you use a standalone master module or an island, the first step before using LEMCOM is to
set the network settings of the master module to make it "visible" on the factory network.
6.1 Computer network settings
To make first configuration easier, it is recommended to use a direct cable connection (M8 / RJ45)
between the computer that will be used for configuration and the master LEMCOM.
Figure 10 - Direct connection between a LEMCOM island and a computer
Considering it is the first time the LEMCOM is used, its default network settings are:
Parameter
IP address
Default gateway
Subnet mask
DHCP
COVAL - LMEIP-UK-D-1155UM0067
Figure 9 - LEMCOM Manager and LEMCOM Web Server preview
RJ45 – M8 CABLE
Factory setting
10.3.182.163
10.3.1.1
255.255.255.0
OFF
Network configuration
24V DC
POWER SUPPLY
COVAL Bus
Termination
15/42