Customer Led (B1); Module Status Indicator (Ms) - Worcester Greenstar 36LXi User Instructions

LEMCOM EtherNet/IP™ - User manual

4.1 Customer led (B1)

Functioning mode of the blue led can be configured according to customer needs using LEMCOM
Manager or LEMCOM Web Server.
The following modes are available:
MODE Detailed functioning
ASC ENABLED + REGULATION ERROR :
BL 1 Led ON if ASC option is enabled / Blinking in case of regulation issue (permanent vacuum) / OFF
otherwise
ASC ENABLED:
BL 2
Led ON if ASC option is enabled / OFF otherwise
REGULATION IN PROGRESS :
BL 3
Led ON during regulation phase / OFF otherwise
REGULATION ERROR :
BL 4
Led blinking in case of regulation issue (permanent vacuum) / OFF otherwise
30M CYCLES PREVENTIVE MAINTENANCE :
BL 5
Led ON if Vacuum counter > 30 million cycles / OFF otherwise

4.2 Module Status indicator (MS)

Red LED Green LED
OFF OFF
OFF Flashing
OFF ON
Flashing OFF
ON OFF
Flashing Flashing
COVAL - LMEIP-UK-D-1155UM0067
Table 3 - Customer led modes
Meaning
Not Powered: check power supply connection.
Standby: Device is not configured.
Operational: Device is configured and operating correctly.
Major Recoverable Fault: incorrect vacuum settings, low voltage error, high
temperature error.
Major Unrecoverable Fault: part lost error, firmware error.
Self-Test: Start-up phase in progress.
Table 4 - Module Status indicator meanings
Front panel indicators and button
13/42