Table of Contents
Advertisement
LEMCOM EtherNet/IP™ - User manual
8.8.3 Configuration assembly instance
Assembly
Data size
Type
instance
(bytes)
160
CONFIG
166
COVAL - LMEIP-UK-D-1155UM0067
Description
L1 threshold (16 bytes)
h1 threshold (16 bytes)
L2 threshold (16 bytes)
h2 threshold (16 bytes)
ASC option (2 bytes)
DIAG_ECO option (2 bytes)
Max. bounces Nb (16 bytes)
DIAG ECO analysis time (16 bytes)
Auto blow (2 bytes)
Auto blow duration (32 bytes)
Valves status (16 bytes)
Customer led mode (16 bytes)
Table 12 - EtherNet/IP Configuration assembly instance
EtherNet/IP™
The assembly 160 is used to transfer the vacuum settings to all LEMCOM of an island (1 to 16 modules). The
parameters are sent to the master LEMCOM at PLC startup, when the communication with the unit is established.
Please note that, unlike LEMCOM Manager that warns user in case of incorrect parameters, the configuration
assembly lets the user sends any settings. That may lead to the apparition of warnings on the modules front panels
(for example: threshold or hysteresis set to 0).
26/42
Comments
Advertisement
Table of Contents
