Frequency Setting; Direct Setting - Mitsubishi Electric FR-PU04 Instruction Manual

2.2

Frequency Setting

The frequency in PU operation mode and External/PU combined operation mode (Pr. 79 = "3") can be set.
REMARKS
· When changing the operation mode from External operation mode to PU operation mode, operation mode cannot
be changed if the external starting signal (STF or STR) is ON.
2.2.1

Direct setting

Directly enter a frequency setting using
 Operation procedure (Changing from 0Hz setting to 60Hz setting)
1
Press .
The frequency setting screen
appears.
2
Press and .
Enter 60Hz.*
3
Press .
The 60Hz setting is complete.
* If you entered an incorrect value, press
return to the pre-entry state.
to .
Freq Set
SET 0.00Hz
Freq Set
SET 0.00Hz
60Hz
Freq Set
SET 60.00Hz 60.00Hz
Completed
to
Frequency Setting
20
2