Connection to the FR-S500/F500J/C500 series inverter
(1) Remove the front cover.
(2) Insert the cable plugs into the connectors on
the inverter and the parameter unit (FR-
PU04/PU04V) until the tabs snap into place.
CAUTION
Do not remove the inverter's wiring cover.
REMARKS
· The cable plug can be connected after cutting off the lug of the wiring cover,
allowing the plug to be inserted and removed without removing the front
cover.
1.2.4
Removal when the connection cable (FR-CB2) is used
Hold down the tab at the cable end and gently pull the plug.
Installation and Removal of FR-PU04/PU04V
Connector
Tab
Lug
Tab
1
10