Installation and Removal of FR-PU04/PU04V
1.2.3
Installation using the connection cable (FR-CB2)
For details of the connection cable (FR-CB2), refer to the instruction manual of the FR-CB2.
Connection to the FR-A500/F500/V500/E500 series inverter
(1) Remove the operation panel.
(2) Insert the cable plugs into the connectors on the inverter and the parameter unit (FR-PU04/PU04V)
until the tabs snap into place.
Junction
connector
Tab
FR-A500/F500/V500 series inverter
CAUTION
Do not remove the inverter's front cover.
9
Tab
Tab
FR-E500 series inverter
Tab