Selecting The Parameter From Functional List To Change The Set Value - Mitsubishi Electric FR-PU04 Instruction Manual

2.3.2

Selecting the parameter from functional list to change the set value

Example: When changing 5s to 180s at the Pr. 8
Deceleration time setting
1
Press .
The frequency setting screen
appears, and operation mode
changes to PU operation mode.
2
Press .
The parameter unit is in the
parameter setting mode.
3
Select the screen using
and move the cursor to
"Appl.Grp".
4
Press .
The function list appears.
5 Select a function.
Point the cursor to "Acc.Dec"
using .
Setting and Changing the Parameter Values
6
Freq Set
SET 0.00Hz
7
SETTING MODE
0~9:Ser Pr.NO.
8
Select Oper
1 Appl.Grp
2 Pr.List
3 User List
9
4 Param Copy
1 Basic Func
2 F Command
3 Acc.Dec
4 V/F pattern
1 Basic Func
2 F Command
3 Acc.Dec
4 V/F pattern
Press .
A function list regarding
acceleration/deceleration is
displayed.
Select a function.
Using , point the
cursor to " Accl/Decl T".
Press .
A parameter list regarding
acceleration/deceleration
time is displayed.
When moving the cursor to
"Dec.T1" using and
pressing , the present set
value is called.
1 Accl/Decl T
2 Accl/Decl P
3 Brake Seq
1 Accl/Decl T
2 Accl/Decl P
3 Brake Seq
7 Acc.T1
8 Dec.T1
16 JOG T
20 Acc/DecF
8 Dec.T1
2
5.0S
0~3600
24