Mitsubishi Electric FR-PU04 Instruction Manual page 51

Overview of the Help Menu
Help Menu
The parameter clear menu appears, and you can perform "parameter clear" and "all
4. Pr.Clear
clear".
5. Alarm Hist
This function displays history of past eight faults (alarms).
6. AlarmClear This function clears all the fault (alarm) history.
7. Inv.Reset
This function resets the inverter.
The inverter displays the cause of mismatch between inverter operation and control/
8. T/Shooting
setting or the cause of an inverter fault. This menu is used for the FR-A500/F500
series only. Selecting this menu for the other models results in an error.
9. S/W
This function displays the software control number of the inverter.
This function displays the signals assigned to the I/O terminals of the control circuit
10. Selectop
and the ON/OFF states of the signals.
11. Option
This function displays the option fitting states of the option connectors 1 to 3.
12. FRCpy set
The function can perform the "parameter copy" (read, write, verification).
REMARKS
· The validity of each help menu depends on the inverter model.
43
Description Refer To
Page 54
Page 56
Page 57
Page 58
Page 58
-
Page 63
Page 64
Page 65