Table of Contents
Advertisement
Once you insert the ink cartridges, check the bottom of the Control Panel display that all of the ink bays
show as GOOD under each color. If it does not, pull out the ink cartridge and reinsert it into the ink bay
and press the color icon to recalibrate. If you still do not see the GOOD message, contact a certified
technician. The printer can now be filled with ink.
Next we will fill the Ink Tubes by selecting the button with all 6 channels, select a duration time of long and
the pop up with a countdown timer will appear. Open the printer top cover to see the ink moving through
the tubes from the ink bay.
Once all of the inks lines (CMYK + 2 White) have passed down into the Print Head Carriage, look into the
front of the print carriage cage to check that all of the ink channels have reached the Print Heads.
• Do not open the top cover while the machine is operating. Doing so might cause your hand or fingers to
get trapped in the machine, and an injury might occur.
• Before opening the top cover, please turn off the power switch on the back of the machine and open it.
Opening the cover without turning off the power may cause the machine to operate and cause injury.
• When opening and closing the top cover, be sure to hold the handle. Be careful so that your hand or any
other part of your body is not caught with the top cover.
Figure 2.6-6: Ink Cartridge Bay Configuration
Figure 2.6-7: Ink Bay Status
40
Advertisement
Table of Contents
