Table of Contents
Advertisement
Figure 7.5-21: Select Border Color to be Removed
You can also select to remove a Border color. This removes a contiguous color up to when it changes to
another color. Please note that better results will be achieved by using your image editing software to
create transparencies.
Once you have completed your settings and adjustments you can now send your image to the printer by
pressing Print or save the graphic to your computer or an USB drive by selecting Print to file.
The Printer will first print the White layer. Once completed, the printer will print the Color Pass. Since
the white Underbase layer may not be dry enough to receive the color layer, there is an adjustment on
the printer's job window to set a wait time before the color layer is printed. By default, it is set to 0.
(Figure 7.5-23) By checking the Manual box you can set it to Manual color layer print. (Figure 7.5-24) This
means that you will need to press the <PRINT> button to have the color layer print. By doing this on your
first print of a particular job you will be able to determine the wait time if any that will be needed to
produce an acceptable print. You can then adjust the color layer wait time by pressing the Up or Down
buttons to the needed setting in increments of 10 seconds..
103
Advertisement
Table of Contents
