Table of Contents
Advertisement
CAUTION
FCC Statement (USA):
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Caution: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Caution: Properly shielded and grounded cables and connectors must be used for connections to host
computer (and/or peripheral) in order to meet FCC emission limits.
User Information on Electrical and Electronic Equipment:
Caution: An AC adapter with ferrite core must be used for RF interference suppression.
Laser (US):
This equipment complies with the requirements of IEC60825-1:2014 for class 2 laser product. The beam
divergence angle is 0.6 mRad (Half Angle). This equipment contains a 650 nanometer wavelength. The
maximum output power of the light source is 1 milliwatt.
Note to Users in California (USA):
Perchlorate Material. Special handling may apply. See
Warning for Electrical and Electronic Equipment (For EU countries only):
This equipment is compliant with Class A of CISPR 32.
In a residential environment, this equipment may cause radio interference.
1) Properly shielded and grounded cables and connectors must be used for connections to a host
computer (and/or peripheral) in order to meet emission limits.
2) An AC adapter with a ferrite core must be used for RF interference suppression.
Laser (EU):
This equipment complies with the requirements of IEC60825-1:2014 for class 2 laser product. The
beam divergence angle is 0.6 mRad (Half Angle). This equipment contains a 650 nanometer
wavelength. The maximum output power of the light source is 1 milliwatt.
EMC Directive:
Warning on Class A Product
This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment
may cause radio interference. As this machine is not a household appliance, it does not conform to
ErP Directive 2009/125/EC which was revised in 2013.
www.dtsc.ca.gov/hazardouswaste/perchlorate
25
Advertisement
Table of Contents
