HPE D6020 User Manual page 17

2. Be sure the I/O modules or I/O blanks are fully seated and their handles are in the locked
position. The hard drive drawer does not open if I/O modules or I/O blanks are not fully
seated with their handles in the locked position.
WARNING! Note the following:
TIP HAZARD! To reduce the risk of personal injury or damage to the equipment, do not
extend the hard drive drawers beyond the supporting surface when the unit is not
installed in a rack.
To reduce the risk of personal injury or damage to the equipment, ensure that only one
hard drive drawer is extended at a time.
3. Extend the hard drive drawer.
Figure 10 Extending the hard drive drawer
WARNING! Pinch hazard—Keep hands away from the front and rear of chassis when
closing hard drive drawers.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the D6020 for an
extended period of time with the drawer open.
To prevent improper cooling and thermal damage, do not operate the D6020 unless all
bays are populated with either a component or a blank.
4. Remove the hard drive blank.
Figure 11 Removing the hard drive blank
5. Locate and prepare a compatible drive.
NOTE: The hard drive to be used in the chassis must be a compatible hard drive. See
the D6020 QuickSpecs for more information.
Installing hard drives 17