HPE D6020 User Manual page 18

6. Fully extend the hard drive lever, and push the hard drive all the way into the drive bay, and
then close the lever.
WARNING!
Be sure to label newly installed hard drives accordingly (see
then install or re-install them in their respective hard drive drawer slots. Always install
or re-install hard drives in their original slots, especially after usage. Inserting a hard
drive in a slot other than its original slot may result in data loss.
Be sure to install hard drives right side up to avoid damage to equipment.
Pinchhazard—Keep hands away from the front and rear of chassis when closing hard
drive drawers.
Figure 12 Installing the hard drive
Figure 13 Numbering drive bay hard drive bays
7. Repeat Step 4
8. After all drives have been installed, close the hard drive drawer.
Figure 14 Closing the hard drive drawer
18 Setting up the system
Note the following:
through to this step for each hard drive needing to be installed.
Figure 13 (page 18)), and