Page 1
Installation Guide is supplied separately. This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.
Page 2
VL-MA72SX VL-VA502SX VL-VA502SX VL-SA72SX *1. Can be configured to be used as an extension monitor *2. Product name used in this document 1.3 Features 17.8 cm digital screen. Hands-free intercom. Smart video recording with SD card. Snapshot with built-in memory of 100 images.
The available products differ depending on your region. For more information, please consult your dealer. In this document, the suffix of each model number (e.g., the "SX" in "VL-SA72SX") is omitted unless necessary- When the suffixes are used to describe models (e.g., "SX models"), the sufixes refer to all models in the series.
(For greater than 40 C (For indoor) & 70 C outdoor). 2.5 For India only...
Page 6
Customer 080-6984-1373 https://www.panasonic.com/in/corporate/e-waste-management.html 2023 Keep the product in isolated area, a�er it becomes non- func�onal/un-repairable so as to prevent its accidental breakage...
Operation Buttons Microphone Indoor Unit / Monitor Hang Up Camera lens Microphone Button / Down White LED Talk Button / Up Speaker Playback Menu Button Call button and indicator Door Unlock SD Card Slot RFID reader Monitor 1 2 3 4 5 6 7 8 DOOR 1 SLAVE-OUT...
Page 8
Operation Instruction VISITOR CALL The Visitor press the call The Visitor press the call button on Door station 1 button on Door station 2 A ringtone is heard inside and outside NOTICE: The visitor's image automatically If both the call buttons on two door stations are pressed displayed on the screen approximately at the same time, the preference will be given to the door station on which call button was press...
Monitoring Mode Option in the settings in the menu: DOOR1, CAM1, DOOR2, CAM2 operating mode (open or closed) Standby mode Monitoring Monitoring Monitoring Monitoring Monitoring DOOR1 CAM1 DOOR2 CAM2 Standby Show DOOR1 Show CAM1 Show DOOR2 Show CAM2 Close LCD image image image...
5.Menu Operations Standby Mode In standby page, date and time, unread recorded files and SD card status will be shown here. 03:47 01-01-2024 Number of recorded videos or snapshot, “9+” stands for more than 9 recorded files are unread. SD card inserted SD card not inserted Menu Operations In standby mode, press the button “...
5.Menu Operations 1. System Setting If the system is unattended for 60s, it will automatically return to standby mode. In standby mode, press the button “ ” to enter the main menu as below. Then move the cursor to the “System” option, and press the button “...
5.Menu Operations 1.2 System Time DD-MM-YY 20-03-2024 17:05 Press the cursor button “ ” or “ ” to select and adjust the date and time, then press “ ” to confirm. 1.3 System Information On system menu, move the cursor to “Information” and press “ ”...
5.Menu Operations 2. Ringtone Setting On main menu, move the cursor to the option “Ring”, then press “ ” to enter the “Ring” menu. Ring setup includes: “Ring select” and “Ring volume”. 2.1 Ring Select On ring menu, move the cursor to “Ring select” and press “ ”...
5.Menu Operations [Schedule 1]: You can select the time period (as below), and then set the volume (range: 01-10) and Ring Time(range: 15-60s). The factory default setting for the volume is 08 and Ring Time is 30s. [Schedule 2]: You can select the time period (as below), and then set the volume (range: 01-10) and Ring Time(range: 15-60s).
Page 15
5.Menu Operations 4. Security Alarm Setting On main menu, move the cursor to the option “Alarm”, then press “ ” to enter the “Alarm” menu. Video [CAM 1 Sensor Type]: Enable or disable (ON/OFF) sensor 1. If disabled, sensor 1 will not trigger alarm. [CAM 2 Sensor Type]: Enable or disable (ON/OFF) sensor 2.
5.Menu Operations On the color menu the video color of Door1/Door2/CAM1/CAM2 attributes can be adjusted. Scroll the button “ ” or “ ” to move the cursor to the option “Door1” or “Door2” or “CAM1” or “CAM2” , then press “...
5.Menu Operations 6.2 Snapshot Files On “Files” menu scroll the button “ ” or “ ” to move the cursor to the option “snapshot Files”, press the button “ ” to enter snapshot files list. Scroll the button “ ” or “ ”...
Page 18
6.Alarm instructions AC/DC power adapter for camera (not included) DC 12V 1 Alarm input 2 GND 3 Video 4 +12V(150mA)
7.Specifications Technical Specifications 17.8 cm Outline Size (cm) (L x B x H ) 19.0 x 2.2 x 14.0 -20℃~+40℃ Door Station(VL-VA502SX) Night vision White light Operating temperature -20℃~+70℃ Illumination 0.1LUX Camera Resolution 2 MP Streaming Resolution (Video) 720x576 Viewing angle 120°...
8.Troubleshooting Caution 1. To prevent damage, the adapter should be fastened on the wall according to instruction. 2. Keep the power plug in a convenient location for easy disconnection of the device. 3. When connecting AC power wire, please finish the connection before plugging in the power. Troubleshooting Problem Solutions...
Need help?
Do you have a question about the VL-SA72SX and is the answer not in the manual?
Questions and answers