Error Reports; Accessories And Spare Parts - TESTO 570 Instruction Manual

8.3.

Error reports

Question
----
measurement parameter
display
Display
If you have any questions, please contact your dealer or Testo
Customer Service. The contact details can be found on the back of
this document or on the Internet at www.testo.com/service-
contact
8.4.

Accessories and spare parts

Description
Clamp probe for temperature measurement
on pipes
The pipe wrap probe with Velcro tape for
pipes with a diameter of up to 75 mm, Tmax.
+75 °C, NTC
Water tight NTC surface probe
Sturdy precision NTC air probe
Pipe wrap probe for pipe diameters from 5 to
65 mm
Clamp probe for measuring current
consumption on compressors with switchable
measuring range
Oil pressure probe to check the oil filling level
in the compressor
Power supply unit, 5 VDC 500 mA with Euro
plug, 100-250 VAC, 50-60 Hz
Software EasyKool
High speed Testo printer with wireless
infrared interface, 1 roll of thermal paper and
4 AA-batteries
Shop for Data Logging products online at:
is lit up instead of
EEP FAIL
www.
Possible causes/solution
Sensor or cable defective
> Please contact your dealer or
Testo Customer Service
Eeprom defective
> Please contact your dealer or
Testo Customer Service
DataLoggerStore
8 Tips and assistance
Article no.
0613 5505
0613 4611
0613 1912
0613 1712
0613 5605
0554 5607
0638 1742
0554 0447
0554 5604
0554 0549
29
1.877.766.5412
.com