Table of Contents
Advertisement
4. Adjust the flashing number with
5. Confirm the input with [OK].
6. Choose the memory location.
7. Press [Save].
6.2.7.
Pressure/Compressor
✓ Oil pressure probe connected to the upper Mini-DIN connection.
1. Press [Mode].
2. Select [Pressure/Compressor].
-
6.2.8.
Current
✓ Clamp probe connected to the upper Mini-DIN connection.
1. Press [Mode].
2. Select [Current].
-
6.2.9.
Efficiency calculation
1. Press [Mode].
2. Select
-
See also Basis of calculation COP, page 30.
6.3.
Saving measurement values
The testo 570 is able to record a series measurement of up to
999 h.
The testo 570 is able to save up to:
•
•
Depending on the selected measuring cycle, only a certain
measurement period can be set. Here is an overview of the
possible settings.
Shop for Data Logging products online at:
and
[►]
to go to the next number.
The measurement values for low pressure side and oil pressure
(p
) are displayed.
ext
The measurement value of the current measurement is
displayed.
[Efficiency
calc.].
The efficiency calculation is displayed.
10000 single measurements or
50 series measurements in a measuring cycle of 2 seconds
over a maximum period of 100 hours.
www.
[▲]
and
DataLoggerStore
6 Using the product
[▼]
and press
[◄]
23
1.877.766.5412
.com
- Quick Links:
- Vacuum Measurement
Hide quick links:
Advertisement
Table of Contents
