5 First steps
12
Shop for Data Logging products online at:
Switching the instrument on
> Press
[
].
-
Initializing phase:
•
All display segments light up (duration: 2s).
-
Measurement view is opened.
The first time the instrument is switched on after a battery has been
inserted or replaced, the following factory settings are stored:
•
Language: English UK
•
Date: 01/01/2011
•
Time: 12:00
•
Temperature unit: °C
•
Pressure unit: bar
•
Vacuum unit: mbar
•
Pressure mode: prel
•
Weight unit: kg
•
Refrigerant: R12
To change the default settings:
See Making settings, page 13.
Display
1 Selected pressure mode
2 Condensation temperature/ acc. to temperature sensor right /
subcooling / differential temperature sensor left&right. The
display reading of measurement values varies in dependence
on the set mode
See also Performing the measurement, page 19.
3
[Min/Max/Mean/Normal]
mode): The middle multi-function key can be used to display the
minimum, maximum and mean values.
4
[Mode]
selectable via the right multi-function key
See also Performing the measurement, page 19.
www.
(exemplary for pressure/temperature
DataLoggerStore
1.877.766.5412
.com