Printing Measurement Values - TESTO 570 Instruction Manual

✓ The desired measuring mode has been selected.
1. Press
2. Select
3. Setting the measuring cycle: Adjust the flashing number with
4. Set measurement period: Adjust the flashing number with
5. Select the desired memory location: Press
-
6. Press [Start].
-
7. Press [Stop].
-
-
6.4.

Printing measurement values

From the measuring mode
✓ The desired measuring mode has been selected.
✓ The testo printer (0554 0549) has been switched on.
1. Press
2. Select
3. Align IR interfaces testo 570 and testo printer.
4. Select Print.
-
-
From the device memory
1. Press
2. Select Memory.
Shop for Data Logging products online at:
[ ].
Serial measurement.
[▲] and [▼] and press
Confirm the input with [OK].
and [▼] and press [◄]
Confirm the input with [OK].
the desired value and press
Customer / Measplace
The set measurement view is displayed. The memory symbol
is displayed.
The memory symbol
when saving the measurement values. Clock (00:00:00) shows
the remaining measuring duration.
The serial measurement was stopped. Clock (00:00:00) shows
the residual measuring duration.
The measurement view is displayed.
[ ].
Single measurement.
The set measurement view and
The printout is generated.
[ ].
www.
[◄] and [►] to go to the next number.
and [►] to go to the next number.
[◄] and [►]
/ Installation / Component.
flashes in the set measuring cycle
printing...
DataLoggerStore
6 Using the product
[▲]
[▲] and [▼] to set
to toggle between
is displayed.
25
1.877.766.5412
.com