HEIDENHAIN TNC 320 User Manual page 70
Cycle programming
Hide thumbs
Also See for TNC 320:
- User manual (670 pages) ,
- User's manual for cycle programming (465 pages)
Table of Contents
Advertisement
U
Disengaging direction (0/1/2/3/4) Q214: Determine
the direction in which the TNC retracts the tool at the
hole bottom (after spindle orientation).
0
Do not retract tool.
1
Retract tool in the negative ref. axis direction.
2
Retract tool in the negative minor axis direction.
3
Retract tool in the positive ref. axis direction.
4
Retract tool in the positive minor axis direction.
U
Angle for spindle orientation Q336 (absolute): Angle
at which the TNC positions the tool before retracting
it. Input range -360.000 to 360.000
70
Example:
10 L Z+100 R0 FMAX
11 CYCL DEF 202 BORING
Q200=2
;SET-UP CLEARANCE
Q201=-15 ;DEPTH
Q206=100 ;FEED RATE FOR PLNGNG
Q211=0.5 ;DWELL TIME AT DEPTH
Q208=250 ;RETRACTION FEED RATE
Q203=+20 ;SURFACE COORDINATE
Q204=100 ;2ND SET-UP CLEARANCE
Q214=1
;DISENGAGING DIRECTN
Q336=0
;ANGLE OF SPINDLE
12 L X+30 Y+20 FMAX M3
13 CYCL CALL
14 L X+80 Y+50 FMAX M99
Fixed Cycles: Drilling
Advertisement
Chapters
Table of Contents
