HEIDENHAIN TNC 320 User Manual page 416

Cycle programming

Hide thumbs Also See for TNC 320:

Table of Contents

17.1 Fundamentals

When running touch probe cycles, Cycle 8 MIRROR

IMAGE, Cycle 11 SCALING and Cycle 26 AXIS-SPECIFIC

SCALING must not be active.

HEIDENHAIN only gives warranty for the function of the

probing cycles if HEIDENHAIN touch probes are used.

The TNC must be specially prepared by the machine tool

builder for the use of a 3-D touch probe.

The TNC provides a cycle for the following special purpose:

3 MEASURING Cycle for defining OEM

Touch Probe Cycles: Special Functions

Chapters

Table of Contents