HEIDENHAIN TNC 320 User Manual page 413

Q284=90.15 ;MAX. LIMIT 1ST SIDE
Q285=89.95 ;MIN. LIMIT 1ST SIDE
Q286=70.1 ;MAX. LIMIT 2ND SIDE
Q287=69.9 ;MIN. LIMIT 2ND SIDE
Q279=0.15 ;TOLERANCE 1ST CENTER
Q280=0.1 ;TOLERANCE 2ND CENTER
Q281=1 ;MEASURING LOG
Q309=0 ;PGM STOP IF ERROR
Q330=0 ;TOOL NUMBER
4 L Z+100 R0 FMAX M2
5 END PGM BSMEAS MM
HEIDENHAIN TNC 320
Maximum limit in X
Minimum limit in X
Maximum limit in Y
Minimum limit in Y
Permissible position deviation in X
Permissible position deviation in Y
Save measuring log to a file
Do not display an error message in case of a tolerance violation
No tool monitoring
Retract in the tool axis, end program
413