Attaching Wrist Strap To The Instrument - Konica Minolta CM-700d Instruction Manual

Attaching Wrist Strap to the Instrument

When measuring by hand, attach Wrist Strap and put your arm through Wrist Strap to prevent dropping
of the instrument.
[Procedure]
1
Pass one end of Wrist Strap through the strap
holder of the instrument.
2
Pass other end of Wrist Strap through the ring,
and pass the strap that passed through the strap
holder through the ring too.
3
Pass one end of Wrist Strap that passed through
the ring through the buckle.
4
Pass other end of the strap through the buckle
from the other side.
M
emo
If necessary, after passing the arm through the strap, move the position of the ring so that the strap is snug your arm.
Preparation
Ring
Buckle
E-17