Setting The List (List; Auto Target - Konica Minolta CM-700d Instruction Manual

Measured Data Operation

Setting the List (List)

When the <Sample> screen is displayed, pressing the [SAVE/SEL] button switches the screen between
the list display and detail display. Specify the columns displayed for each sample data No. in the list.
[Setting Procedure]
1
Use the or
the cursor to "List" and then press the [SAVE/
SEL] button.
The <List> screen is displayed.
2
Use the or
the cursor to the desired item.
Settings
❍Name: Display the name specified with Edit Name in the
list.
❍Date&Time: Display the date and time of the
measurement in the list.
❍Pseudo Color: Display the pseudocolor in the list.
3
Press the [SAVE/SEL] button.
The selection is confirmed and the screen returns to the <Menu> screen.
N
ote
If you press the [TARGET] (Back) button without pressing the [SAVE/SEL] button, you return to the
sample data screen without changing the setting.

Auto Target

Automatically select the target color with the smallest color difference (∆E*ab) for measurement.
M
emo
The target color will be selected from those with the same specular component mode setting as the measurement.
For example, when the specular component mode "I + E" is used for the measurement, the target color is selected
from those for which "I + E" has been set.
N
ote
• Do not use this function if you want to check the color difference from a specific target color.
• This setting will not be applied to the measured data obtained before this function is set to ON.
E-84
Start the procedure from the <Menu> screen of the <Sample> screen.
button of the cross key to move
button of the cross key to move