Working With Presets - AVT MAGIC AE1 DAB+ Hardware & Software Manual

O p e r a t i o n v i a D i s p l a y
P A GE 2 8
a n d K e y p a d
4.4

Working with Presets

The MAGIC AE1 DAB+ differentiates between
System Settings are settings that do not change during normal operation like
e.g. display contrast, date/time etc. These parameters cannot be saved as pre-
set since a configuration is usually only required when the system is put into
operation.
Operation Settings need to be reconfigured depending on the application. To
easily recall recurring configurations you can store up to 10 presets in the sys-
tem.
You reach the menu for the Presets by pressing the
sor key
In the input field
enter a character, the corresponding entries of the Preset list are filtered out.
Alternatively, you can select a Preset from the list using the cursor keys
.
and
If you now press the
By the softkey
the softkey
– : The stored Preset is loaded.
– : With the help of this function you can create a new Preset. All current
Operation Settings are stored.
– : The currently selected Preset is overwritten with the current Opera-
tion Settings. For safety reasons a confirmation is required.
–
a confirmation is required.
–
safety reasons a confirmation is required.
NOTE
If the configuration has changed, you are asked if you want to
when you leave the Preset menu. Via the
stored permanently in the system. This Preset is loaded automatically by the
system after the unit is connected to the power supply.
.
twice and by pressing the softkey
you can search for a certain Preset. As soon as you
button, the selected Preset is loaded immediately.
(Options) the following functions which you can select via
are realised:
: The currently selected Preset is deleted. For safety reasons
: All settings will reset to the factory settings. For
and
softkey once, the cur-
once as confirmation.
softkey the configuration is