Table of Contents
Advertisement
4.4
Working with Presets
The MAGIC AE1 DAB differentiates between
tings
.
Basic Settings are settings that do not change during normal operation like e.g.
display contrast, date/time etc. These parameters cannot be saved as preset
since a configuration is usually only required when the system is put into opera-
tion.
Operation Settings need to be reconfigured depending on the application. To eas-
ily recall recurring configurations you can store up to 10 presets in the system.
You reach the menu for the Presets by pressing the
key
twice and by pressing the softkey
In the input field
a character, the corresponding entries of the Preset list are filtered out.
Alternatively, you can select a Preset from the list using the cursor keys
.
If you now press the
By the softkey
Select
softkey
Load
–
: The stored Preset is loaded.
New
–
: With the help of this function you can create a new Preset. All current Op-
eration Settings are stored.
Save
–
: The currently selected Preset is overwritten with the current Operation
Settings. For safety reasons a confirmation is required.
Delete Preset
–
confirmation is required.
NOTICE
If the configuration has changed, you are asked if you want to
when you leave the Preset menu. Via the
permanently in the system. This Preset is loaded automatically by the system af-
ter the unit is connected to the power supply.
O p e r a t i o n
v i a
Select
Presets
you can search for a certain Preset. As soon as you enter
button, the selected Preset is loaded immediately.
Opt.
(Options) the following functions which you can select via the
are realised:
: The currently selected Preset is deleted. For safety reasons a
Yes
D i s p l a y
a n d
K e y p a d
Basic Settings
Operation Set-
and
Menu
softkey once, the cursor
once as confirmation.
Save settings?
softkey the configuration is stored
PAG E 27
and
Advertisement
Table of Contents
