Heat Exchanger Settings - Salda Ptouch Service Manual

19. HEAT EXCHANGER SETTINGS
F1
F2
Number Function
I1
Current setting indication.
Number Function
Heat exchanger type:
None;
F1
Plate;
Rotor.
Plate heat exchanger frost protection strategy:
None;
Pre-heating by set point;
F2
Pre-heating by frost point;
Recirculating by set point;
Recirculating by frost point.
Set point (as a difference from frost point).
F3
Range: [-30-10 °C]
EN
19
I1
F3
25