Recirculation Damper Settings - Salda Ptouch Service Manual

Number Function
I1
Current setting indication.
Number Function
Supply/extract damper type:
None;
On/off: one-terminal controlled damper. Closes mechanically if no
F1
signal is provided;
OpenClose: two-terminal controlled damper. Stays still if no signal
is provided. Can be opened or closed partially.
Time required for supply/extract damper to fully open (in seconds).
F2
Range: [0-255 s]
17. RECIRCULATION DAMPER SETTINGS
F1
F2
Number Function
I1
Current setting indication.
Number Function
Recirculation damper:
Enabled;
F1
Disabled.
Time required for recirculation damper to fully open (in seconds).
F2
Range: [0-255 s]
EN
17
I1
23