Installation; Setting Up Device - Weinmann WM 13011 Description And Operating Instructions

Oxymat 3 oxygen concentrator from serial number 8000
Table of Contents

Advertisement

84

4. Installation

4.1 Setting up device

Fix the enclosed card with warning notices in
your own language to the OXYMAT 3.
Please observe the following when coosing
the site for the device:
Choose a well-ventilated position where
the OXYMAT 3 does not cause prob-
lems.
This site should be somewhere central in
your home, so that you can move around
as freely as possible with the dosage
monitor
and the long 20-meter connect-
9
ing tube
.
7
Place the OXYMAT 3 in another room if
you are disturbed by the noise it makes.
Your OXYMAT 3 should stand in a level
and dry place. Do not put the OXYMAT 3
in a damp room or on the balcony.
The air drawn in by the concentrator is
also used for cooling. Do not place the
OXYMAT 3 in front of a heater or in di-
rect sunlight.
You are recommended to put it on a
smooth floor to ensure unimpeded air cir-
culation. Avoid placing the device on
thick carpets.
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm 13021Wm 13031Wm 13041Wm 13017Wm 13018

Table of Contents