As an alternative to a configuration name generated
automatically consisting of a date and a time, e.g.
cfg_20120622_1530, a name consisting of a maximum of
20 characters can be edited to save the configuration.
The following options can be selected in the start
configuration for system start:
Auto focus
•
Level/span
•
(range fix)
Auto calibration
•
•
Auto save
When loading the factory settings, all previously
made system settings will be undone. If settings
must possibly be re-used at a later point in time,
we recommend saving a user configuration
beforehand.
On/Off
Auto level/range, auto level
On/Off
On/Off
Note
System Menu
The "System" menu item contains the settings and
information about the basic functions of the thermal
imager. Along with the settings for language, date, and
time, which as a rule must only be configured rarely, it is
possible to set the brightness of the viewfinder and the
display, to set the font size, as well as to make a number
of further settings for representation and navigation within
the menu, amongst other things.
After the system settings were adapted to the
individual requirements, we recommend saving
the settings in a user configuration.
Display Menus
System Menu
hvh245.jpg
Note
3-47
3