TiS10, TiS20, TiS40, TiS45, TiS50, TiS55, TiS60, TiS65
Users Manual
Menus
The menus are the access points for thermal image
display, camera features, memory setup, and settings for
date, time, language, units, file format, and Imager
information.
Measurement Menu
The Measurement Menu has settings for the calculation
and display of radiometric temperature measurement data
related to the thermal images. These settings include the
Temperature Range selection, Level/Span adjustment,
Emissivity, Background, Transmission, Spot
Temperatures, Center Box, and Markers.
Range
Range (level and span) is set to automatically adjust or is
set for manual adjustment. To choose between automatic
or manual level and span, do the following:
1. Push 2.
2. Push W/X to highlight Measurement.
3. Push 1 or Z to view the menu.
4. Push W/X to highlight Set Level/Span.
5. Push 1 or Z to view the menu.
6. Push W/X to toggle between the Auto and
Manual ranging.
7. Push 1 to set.
16
8. Push:
• 1 to set the change and go back to the live
view.
• 2 or Y to set the change and go back to the
previous menu.
• 3 to cancel the change and go back to the live
view.
Fast Auto/Manual Range Toggle
When NOT in a menu mode, push 1 for 3 seconds to
toggle between Auto Range and Manual Range.
Fast Auto Rescale
When in Manual Range and NOT in a menu mode, push
3 for <½ second to automatically rescale the level and
span range for objects in the thermal field of view. This
feature operates the Imager in a semi-automatic mode if
manual fine re-adjustment of level and span with the arrow
buttons is not necessary. Rescaling can be done as often,
or as little, as needed.
The Imager always powers up in the same Range
mode, Auto or Manual, as when it was powered
down.
Note