Configuration Submenu - Fluke tix640 User Manual

Two temperature thresholds can be defined referring to
the average value ("Average"), the maximum temperature
value ("Upper limit"), or the minimum temperature value
("Lower limit") of all defined measuring objects. If no
measuring object is defined, the temperature thresholds
refer to the entire image. If at least one of the defined
conditions is fulfilled, the following actions may be
performed:
Visualization
•
Save
•
COM
•
Audio
•
Digital out 1
•
Digital out 2
•
Alarm indication and display of
the fulfilled condition
Image saving in accordance
with the settings in "Saving
format"
Alarm indication via the
RS232 interface
Output of an acoustic alarm
signal
Alarm signal at digital output 1
Alarm signal at digital output 2

Configuration Submenu

You can save your individual device settings as device
configuration in the thermal imager. This way, you can
configure and, if required, reload user and/or application
profiles matching different requirements. Additionally, you
can define actions the camera is to perform when the
system is started. These actions are also saved to the
corresponding configuration.
The "Configuration" menu item contains the following
submenus:
Load
•
Save
•
Start
•
Default Settings
•
3
Display Menus
Settings Menu
hvh240.jpg
3-45