Display Submenu - Fluke tix640 User Manual

TiX640, TiX660, TiX1000
Users Manual

Display Submenu

The "Display" submenu can be used to select the display
settings for the thermal imager. In the standard
configuration (factory settings) the display is switched
from the display to the viewfinder when the display is
folded to the camera housing (active display: automatic).
However, you can fixedly set Display or viewfinder
(Finder) as active display element.
3-48
The brightness values of display and viewfinder can be
set independently using the levels "Bright", "Medium",
and "Dimmed". When the ambient lighting conditions are
"normal", the brightness setting "Medium" is absolutely
sufficient for the display. In dark conditions, the setting
"Dimmed" should be selected.
The DVI-D output can also be set, with the formats 768p
and 800p being the available selection options.
Regarding the FBAS interface (TV output), it is possible
to toggle between the standards PAL and NTSC.
hvh246.jpg