TiX640, TiX660, TiX1000
Users Manual
Focus
Carefully setting the focus is important to achieve a
precise temperature measurement with the thermography
system.
Use the focus rocker switch to:
Manual focus
•
push the left side of the focus rocker switch in
o
order to change the focus to longer distances
and/or
push the right side of the focus rocker switch in
o
order to change the focus to shorter distances.
Auto focus
•
push the center function of the focus rocker
o
switch.
The zoom setting can be used to manually focus
for measurements of small objects.
It is not necessary to change the visible light image focus.
2-10
Note
®
LaserSharp
Auto Focus
To setup:
1.
Go to Laser menu and select LaserSharp Auto
Focus.
2.
Push the center function of the focus rocker switch.
Permanent LaserSharp
Go to the Laser menu and select LaserSharp Auto
Focus.
Laser will continuously display and will automatically
focus when the distance to target changes.
EverSharp Multifocal Recording
1.
Go to the "Extras submenu" in the "Settings Menu".
2.
Select "EverSharp" within this menu
Once selected, the camera takes all images in the
EverSharp mode.
Images taken with EverSharp will be viewable in
®
SmartView
software. Feature is supported in
®
SmartView
starting in January 2015.
®
Auto Focus
Note