Breakout Box - Fluke tix640 User Manual

TiX640, TiX660, TiX1000
Users Manual
 Caution
Follow the specified steps on how to
establish the required connections.
1. Connect the thermography camera to the breakout
box. For this, the 14-pin connecting cable of the
breakout box must be used. It is connected to the
right-hand side 14-pin LEMO socket on the backside
of the thermal imager.
2
1
1-28
Table 1-7. Breakout Box
6 5 4
2. Connect the breakout box to the COM interface of
the host computer with a commercially available
cable.
3. Connect the supplied ac adapter to the breakout box.
4. Push the Power button
camera to turn on the thermography system.
Item
3
Connecting cable for thermal imager

14-pin LEMO socket for ac adapter

Terminal strip

Trigger T1, T2 (configurable)

BNC video port (PAL/NTSC-FBAS)

Serial interface (RS232)

hvh061.eps
on the backside of the

Description