Configuring Information Center - H3C S5500-SI Series Operation Manual

Operation Manual – Information Center
H3C S5500-SI Series Ethernet Switches
informational
debugging
Information filtering by severity works this way: information with severity value greater
than the configured threshold will not be output during the filtering.
If the threshold is set to 0, only information with the severity being emergencies will
be output;
If the threshold is set to 7, information of all severities will be output.
Note that there is a forward slash between the levels (severity) and digest fields.
VI. Digest
The digest field is a string of up to 32 characters, outlining the system information.
Note that there is a colon between the digest and content fields.
VII. Content
This field provides the content of the system information.

1.2 Configuring Information Center

Information center has the following characteristics:
Supports information output to the console, the monitor, the log host, the trap
buffer, the log buffer, and the SNMP agent (snmpagent). A default channel is
allocated to each individual output direction, as illustrated in the following table.
System information is classified into eight categories according to severity and
filtered by severity;
System information is categorized and filtered by source module;
The output information can be in English or Chinese.
Table 1-3 Information channels for different output directions
Output direction
Console
Monitor terminal
Log host
Trap buffer
Log buffer
SNMP NMS
Severity
6
7
Information channel No.
0
1
2
3
4
5
Chapter 1 Information Center Configuration
Severity Value
1-4
Description
Normal prompts
Debugging prompts
Default channel name
console
monitor
loghost
trapbuffer
logbuffer
snmpagent