Selecting A Talkgroup - Motorola Astro APX User Manual

5 Press and hold the  button to start the Selective Call.
The display shows the ID of the target radio.
6 Release the  button to listen.
7 Press to return to the Home screen.
If you do not press button to hang up, your radio will remain
in Selective Call state with the other unit. You will miss all
subfleet traffic and incoming phone calls.


This feature allows you to define a group of conventional
system users so that they can share the use of a conventional
channel.

Encryption keys are associated to talkgroups. When
talkgroups are enabled, encryption keys are changed
by changing the active talkgroup. See Secure
Operations on page 77 for more information.

Selecting a Talkgroup


1 or (on the keypad mic.) to
2 Press the  button directly below
display shows the last talkgroup that was selected and
stored.
3 or to for the preset preprogrammed talkgroup.

or to the required talkgroup.

Use the keypad to enter the number of the corresponding
talkgroup in the list.
4 Press the  button directly below
currently selected talkgroup and return to the  screen.
5 If the encryption key associated to the new talkgroup is
erased, a momentary key fail tone sounds and the display
shows .

If the encryption key that is associated to the new talkgroup
is not allowed, a momentary key fail tone sounds and the
display shows
or the  button to exit.
6 Press
.
. The
to save the
.

