MN004478A01-AN
Chapter 7: Advanced Features
The speaker unmutes.
Procedure:
1. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
2. Press and hold the PTT button to talk. Release the PTT button to listen.
7.2.1.2
Making a Selective Call
Prerequisites: Your radio must be preprogrammed for you to use this feature.
Procedure:
1. Perform one of the following actions:
●
To access this feature by using a preprogrammed button, press the preprogrammed Selective
Call button to dial the preprogrammed ID. Proceed to
●
or to Call, and press the Menu Select button directly below Call.
The display shows the last transmitted or received ID.
2. To select the required ID, perform one of the following actions:
●
Press the Menu Select button directly below Cnts to scroll through and select the required ID.
●
Press the Menu Select button directly below LNum to go to the last number dialed.
●
or
to the required ID.
●
Use the keypad to enter the required ID.
3. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth.
4. Press and hold the PTT button to start the Selective Call.
The display shows the ID of the target radio.
5. Release the PTT button to listen.
6. Press
to return to the Home screen.
7.2.2
Talkgroup Call Feature (Conventional Only)
This feature allows you to define a group of conventional system users so that they can share the use of a
conventional channel.
NOTE: Encryption keys are associated to talkgroups. When talkgroups are associated, encryption keys
are changed by changing the active talkgroup. See
information.
7.2.2.1
Selecting a Talkgroup
Procedure:
1.
or to Tgrp and press the Menu Select button directly below Tgrp.
The display shows the last talkgroup that was selected and stored.
52
step
3.
Secure Operations on page 97
for more