Motorola Astro APX User Manual page 75



If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear the
Menu Inactive Exit Tone upon feature exit.

Press the preprogrammed 
 button to send a page to the preprogrammed ID
and proceed to Step 5 of the procedure below.

Follow the procedure below.
1 or (on the keypad mic.) to
2 Press the  button directly below
3 or to select the required ID.
4 Press the  button to send the page.
5 The display shows
6 If the call alert page is sent successfully, four highpitch tone
sounds and the display shows

If the call alert page is not acknowledged, a low tone sounds
and the display shows
.
.
or .
.
.
7 The radio returns to the Home screen.

Press the  button directly below
the main screen for Contacts.

Follow the procedure below.
1 or (on the keypad mic.) to
2 Press the  button directly below
3 or to select the required ID, press the  button to
initiate the call.
4 If the target radio does not respond after a preprogrammed
period of time, the display shows
5 Press the  button directly below
the call alert page.

Press the  button directly below
screen without sending the call alert page.
6 The display shows
7 If the call alert page is sent successfully, a tone sounds and
the display shows

If the call alert page is not acknowledged, a low tone sounds
and the display shows
to return to
.
.
.
to send
to exit the
.
.
.

