Motorola Astro APX User Manual page 52


This feature allows you to send an individual Call Alert or page if
there is no answer from the target radio. Your radio must be
preprogrammed to allow you to use this feature.

Press the preprogrammed 
 button to dial the preprogrammed ID
and proceed to Step 5.

Follow the procedure below.

or (on the keypad mic.) to

Press the  button directly below
display shows the last transmitted or received.

Press the  button directly below
through and select the required ID.

Press the  button directly below
the first number of the call list.

or to the required ID.

Use the keypad to enter the required ID.

Press the  button to start the Private Call.


.
. The
to scroll
to go to

A telephone-type ringing sounds if the receiving unit is in
service. The display shows
.

Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.

When you are connected, the display shows the ID of the
target radio. Press and hold the  button to talk. Release
the  button to listen.

If no acknowledgment is received, the display shows
.

If the target radio does not respond before the time out, the
display shows

Press to return to the  screen.
See Sending a Call Alert Page on page 55 for more
information.
or
.