Logging In As A User - Motorola Astro APX User Manual


This feature allows you as the user to be associated with the
radio. With this association, every data application (Example:
Text Messaging Service) takes on a friendly username.
You can still send text messages without logging in as a user.
The user login feature only enables the recipient of your
message to identify you as the sender by assigning a username
to your message.
 Valid characters for a username entry are capital letters
(A – Z), small letters (a – z), numbers (0 – 9), symbols
(*, #, -, /), and the space character.
The maximum length for a username is eight (8)
characters. Usernames are not case sensitive in server
mode but are case sensitive in non-server mode.
A predefined username may sometimes be invalid
because the programming software that is used to set
predefined usernames allows you to set usernames
comprising of eight (8) characters or more.

Logging In as a User


1 or (on the keypad mic.) to
2 Press the  button directly below
3 The display shows the User Login screen.
4 Press the  button directly below
5 A blinking cursor appears beside
enter a username using the keypad multi-tap function.

or to scroll through the list of predefined usernames.
Press the  button to select a predefined
username.

Press and hold or to scroll through the list of
predefined usernames at a fast scroll rate.
Press the  button directly below
a predefined username.
6 If the selected predefined username has more than eight (8)
characters, or an invalid character in it, the display
momentary shows

Press the  button directly below
7 A blinking cursor appears beside
Enter your Personal Identification Number (PIN) number.
.
.
.
. Use the keypad to
to select
. Repeat Step 5.
.
.

