Table of Contents
Advertisement
MN004863A01-AN
Chapter 7: Advanced Features
The display shows the ID of the target radio.
5. Release the PTT button to listen.
6. Press
to return to the Home screen.
7.1.2
Talkgroup Call Feature (Conventional Only)
This feature allows you to define a group of conventional system users so that they can share the use of a
conventional channel.
NOTE: Encryption keys are associated to talkgroups. When talkgroups are associated, encryption keys
are changed by changing the active talkgroup. See
information.
7.1.2.1
Selecting a Talkgroup
Procedure:
1.
or
to Tgrp and press the Menu Select button directly below Tgrp.
The display shows the last talkgroup that was selected and stored.
2. Perform one of the following actions:
●
or
to Preset for the preset preprogrammed Talkgroup.
3. Press the Menu Select button directly below Sel to save the currently selected talkgroup and return
to the Home screen.
If the encryption key associated to the new Talkgroup is erased, you hear a momentary key fail tone
and the display shows Key fail.
If the encryption key that is associated to the new Talkgroup is not allowed, you hear a momentary key
fail tone and the display shows Illegal key.
4. Press
to return to the Home screen.
7.1.3
Sending a Status Call
This feature allows you to send data calls to the dispatcher about a predefined status. Each status can have
up to a 14-character name. For trunking, a maximum of eight status conditions is possible. For conventional,
a maximum of 16 status conditions is possible.
Procedure:
1. Perform one of the following actions:
●
Press the preprogrammed Status button.
●
or
to Sts and press the Menu Select button directly below Sts.
The display shows the last acknowledged status call, or the first status in the list.
2.
or
to the required status.
44
Secure Operations on page 80
for more
Advertisement
Table of Contents
