Motorola Astro APX User Manual page 54


The  operation increases the radio's range by
connecting with other radios through a repeater. The transmit
and receive frequencies are different.
The  or "talkaround operation" allows you to bypass the
repeater and connect directly to another radio. The transmit and
receive frequencies are the same.

Press the preprogrammed  switch to toggle
between talkaround and repeater modes.

Follow the procedure below.

or (on the keypad mic.) to

Press the  button directly below

The display shows
in Repeater mode.

The display shows
the radio is currently in Direct mode (during conventional
operation only).
You can repeat step 2 to toggle between the two modes. Once
in Direct Mode, press PTT button to start conversation with the
radios nearby.


.
.
if the radio is currently
and the Talkaround icon if

Radio users who switch from analog to digital radios often
assume that the lack of static on a digital channel is an
indication that the radio is not working properly. This is not the
case.
Digital technology quiets the transmission by removing the
"noise" from the signal and allowing only the clear voice or data
information to be heard.
Monitor a channel to ensure the channel is clear before
transmitting.


Lift the microphone off hook.


Listen for activity on that channel.

Adjust the volume by rotating the  if necessary.

If you hear no activity, press and hold the  button to start
your conversation.
