Initiating an Announcement
If your radio has been programmed to allow announcement
calls:
1 If channel is set as the primary mode, turn the to locate
the announcement-group mode.
2 Press the microphone button to initiate the
announcement.
This feature allows the user to select the radio's functionality
based on the Ignition State of the radio user's vehicle. The
available options are as follows.
This option allows the user to power on and power off the radio
through the button regardless of the Ignition's current
state.
This option allows the user to power on and power off the radio
through the button regardless of the Ignition's current
state. In addition, if the Ignition is not present, then all
transmissions are inhibited. This includes receiving any
Trunking dispatch communications since the radio will not
affiliate with the Trunking systems.
This option allows the user to power on and power off the radio
through the button regardless of the Ignition's current
state. In addition, if the Ignition is not present, then all
button transmissions are inhibited. However, the radio is able to
affiliate with the Trunking systems.