Motorola Astro APX User Manual page 63

 Your radio is preprogrammed with a number of contacts
per Call Lists. Check with your dealer or system
administrator for more information.
If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear the
Menu Inactive Exit Tone upon feature exit.


Your radio must be preprogrammed to allow you to use
this feature.

Use the Options Menu.
1 or (on the keypad mic.) to
2 Press the  button directly below
call list. The display shows Contact Alias.
3 or to the required subscriber alias.
4 Press the  button directly below
5 or (on the keypad mic.) to
 button directly below
6 or to select the call type.
.
to the
.
and press the 
.
7 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
8 Press the  button to initiate the call. During the call, the
display shows the subscriber alias.
9 Press and hold the  button to talk. The LED lights up
solid red.

Release the button to listen. The LED lights up solid
green.
10 If there is no voice activity for a programmed period of time,
the call ends.

The call ends when it reaches the maximum ring time.

Use the  button:
1 or (on the keypad mic.) to
2 Press the  button directly below
3 or to the required subscriber alias.
4 Press the  button directly below
display shows Contact Alias.
5 Hold the microphone vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
.
.
. The

