Motorola Astro APX User Manual page 60


This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name. A maximum
of eight status conditions is possible.
 If the feature inactivity timer is enabled, your radio
automatically exits the feature when your radio is left
idle long enough for the time to expire. You will hear the
Menu Inactive Exit Tone upon feature exit.

Press the preprogrammed  button and proceed to Step 3.

Follow the procedure below.
1 or (on the keypad mic.) to
2 Press the  button directly below
3 The display shows the last acknowledged status call, or the
first status in the list.
4 or to the required status.

Use the keypad to enter a number corresponding to the
location in the status list.
5 Press the  button to send the status. The display shows
.


.
.
6 When the dispatcher acknowledges, four tones sound and
the display shows
normal dispatch operation.

If no acknowledgment is received, a low-pitched tone
sounds and the display shows
7 Press to return to the Home screen.
No traffic is heard on trunked channels while Status Calls is
selected. If the radio detects no Status Call activity for six
seconds, an alert tone sounds until you press
button.
. The radio returns to
.
or the PTT