Power Module-Right; Setting Up The Power Module - Dell Edge 5000 Series Installation And Operation Manual

Power module—Right
Features
1 Edge Gateway expansion port

Setting up the power module

WARNING: Before installing the power module, shut down the Edge Gateway and disconnect the power cable.
NOTE: To enable and use the IO expansion module, you must also install the power module.
1. Attach either wall-mount brackets or a DIN rail mounts to the power module as needed.
2. Remove the screw and the dust-cap covering the power module expansion port on the Edge Gateway connector.
Connect the power module to the Edge Gateway for increased
power options and to power the IO expansion module.
85