Power; Power Source - Dell Edge Gateway 3002 Specifications

Power

Power source

The Edge Gateway supports the following power sources, which are isolated to 2.5 KV:
• DC-IN
• Power over Ethernet (PoE)
CAUTION: Turn off the Edge Gateway before you change the power source.
NOTE: You can connect either DC-IN and/or PoE.
NOTE: USB power is limited to 0.6 A/3 W for USB 3.0 port and 0.4 A/2 W for USB 2.0 port. Ensure that the Edge
Gateway is within the allowed 13 W PoE Class 0 range.
Table 7. DC parameters
DC parameters
Supported input voltage
Maximum input current
Minimum DC supply power requirement
Power management
Supported wake up events
Power protection
System idle
Processor full load
8
12/24 V vehicle power system (12 V ~ 57 V wide DC input, ISO
7637-2 & SAE J1113 compliant).
NOTE: Supports vehicle cold-crank down to 6 V.
1.08 A at 12 V/0.23 A at 57 V
13 W
System power on, standby, and hibernate management through
optional ignition input.
• Alarm (real-time clock)
• WLAN and LAN (Windows OS only)
• USB
• Ignition and Direct Ignition (DI)
System power protection. For example, vehicle battery
protection through optional ignition input.
NOTE: Ignition input provides an option to turn off the
device or put it into a low-power mode (depending on
the OS), whenever the vehicle ignition is turned off to
protect from vehicle battery draining.
4.2 W
NOTE: Operating system is active but no applications
are running.
8.1 W
NOTE: Operating system active with 100% processor
utilization and 2D/3D load.
3